Specifications
HydroTap Celsius Plus Tap (AIO)
Installation
Over the sink as the primary faucet
Flow Rate
Max 1.8gpm / 6.81 lpm
Sparkling Water Flow Rate
0.4 gpm / 1.51 lpm
Mixer Type
Ceramic disc cartridge
Water outlets
Installation requires both hot and cold water supplies
Clearance for handle
Minimum distance from center hole to wall: 3 7/16” (88mm)
Style
HydroTap Celsius Plus All-in-One BCS 120V
Water outlets
Installation requires both hot and cold water supplies
Water Pressure
Min 37psi – Max 100psi (2.60 - 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
Water Connection
2 x 1/2” BSP or 3/8” FPT compression (depending on manufacture date) with shut off valve is required
within 3’ (0.9m) of the installation
Integral Water Values
All HydroTap systems are fitted with a Dual Check Valve and a 50psi (3.52kg/cm2) Pressure Limiting Valve
Water Supply Requirements
Potable drinking water supply
Optimal Total Dissolved Solids (TDS) Range
TDS Min 50ppm – Max 150ppm
Integral Water Filter
0.2 micron, 1 size - replace every 1,100 gallons / 4,163 liters or 12 months
Power Rating
110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
Command Center Dimensions (WxDxH)
13.3” x 18.2” x 13.1” / 339mm x 462mm x 333mm
Minimum Air Gap
Minimum of 2” / 50mm clearance on left and right side and 8” / 200mm above
Minimum Cabinet Size (Without Garbage Disposal)
20” wide x 24” deep / 508mm wide x 610mm deep
Minimum Cabinet Size (With Garbage Disposal)
30” wide x 24” deep / 762 mm wide x 610mm deep
Maximum Hose Connection Length
3’ / 0.9m (tap to command center)
Minimum Distance Needed for Installation
15” / 381mm (interior wall to garbage disposal)
Warranty
3 years (2 year Limited Warranty plus additional 1 year available on product registration)
Compatible CO2 Cylinder
Zip Water 1.5lb CO2 or 5lb CO2 (if space allows) with CGA-320 fitting
CO2 Operating Pressure
Min 39psi - Max 44psi / Min 2.74 - Max 3.09kg/cm2
